Works Bell Rapfix Racing Quick Release Adapter - Weld On Type

Description

FOR OFF-ROAD USE ONLY!

Works Bell is Japan's premier interior performance company, well known for their Rapfix series of quick releases. The Rapfix Racing uses a patented ball locking design which will not come off during driving but allows for quick and easy removal. No play whatsoever, this is the ORIGINAL! The piece is a cold forged aluminum body, which is track tested and proven by the top Japanese race drivers. Makes it easier to get in and out of your car, and also provides added security when parked.

This quick release will only bolt to 3 bolt patterned Wheels and welded on hub shafts. This is NOT a hub, welding is required in order to use this. This is meant for race applications and experienced experts only.

The height is 2.5" tall, so in some cases it may place the wheel to close to the driver. In cases as such, you may consider calculating distance before welding from the distance between the driver and steering wheel.

Mechanics
Eight holes grooved in the plug side match the delicate steel balls used in the bearing. This provides a firm lock for both radial and lateral movement. The steel balls are released into the free position when the sleeve is pulled, then the socket can be detached from the plug. The sleeve section, once pulled, is locked. Once remounted onto the plug section, the sleeve automatically locks back into position.

Characteristics
When reattaching a separated Rapfix unit back onto it's hub, the position of the wheel does not matter due to the fact that the Rapfix will only lock back into place in the same position in which it was disconnected. Other quick release mechanisms require the wheel to be positioned in a specific location before reattaching the wheel. Furthermore, Works Bell's unique technology ensures that there is no shakiness or play because the steel balls keep constant and consistent pressure on the plug at any time. Therefore, it plays a big part in the driver's severe steering wheel operation. In addition, in order to establish the reliability of Rapfix Racing in a race, a new mechanics, Cam Lock, whick certainly locks the radial loads by combining the plug and the socket, is adopted. Therefore, security is guaranteed by putting the Cam Lock System together with the Ball Lock System.

Specifications
It is developed especially for formula cars. Chromium molybdenum steel SCM435 is used for the plug in order to weld the steering shaft easily; SUS420 is used for the liner in order to realize the lightweight and high-strength of sleeve. Moreover, the socket made byextra super-duralumin (A7075T6) and special plating fulfills the endurance. Assuming the hard use of the plug top, protective cap is installed. It is possible to change the damage protective cap to a new one.

Strength
Rapfix Racing cleared the NAPAC standard (a standard for after market products in Japan). A screwing test was done to check the operation of steering wheel to radial power. There was not any change in the shape after being pounded by dead loads of 29.7kg.m (291N.m). Moreover, there was not any change in the shape after a bending test of dead loads of 19.8kg.m (194N.m) in order to examine the effect when a driver impacts the steering wheel in an accident.

According to the results of these tests, although the bending test and screwing test based on regulation loads caused the permanent transformation and the shakiness increased, the product is still possible to be detached and attached and it is not broken. Therefore, these tests prove that the steering wheel can still be operated when large loads act. According to these results, Rapfix Racing has the same or more strength than the spline style Quick Release Hub of other companies.

We also tested that how much can be released when the plug and socket are pulled strongly. They were not destroyed by 3754kg(36.8KN). The test was ended when the bolt, which is fixed to the steering wheel, was destroyed. The quick release function can be still operated. Therefore, it is confirmed that Rapfix Racing could endure the pull power of 68G because the standard weight of a driver according to Japan Safety Standard is 55kg. We did 10,000 times repeated attachment and detachment tests for testing the endurance. We proved that there is no broken and it is still possible to drive, attach and detach, although the shakiness increased.

OPTIONAL: If you would like to use a standard 6 hole PCD for the quick release, Works Bell offers an adapter which will allow you to use any Sparco, Momo, Personal, Nardi or same P.C.D. steering wheel. Select the option above if desired.

Electric Contact Kit: Used for weld type only. 12 electric contacts can be added for weld type by installing this kit. The contact part can be released together with the steering wheel.