TiAL V60D Wastegate

Description

The V60D is everything you love about our V60 but with an inverted diaphragm designed for over 100 psi of actuation control pressure. The inverted diaphragm design takes the standard wastegate idea and turns it upside down, allowing for boost control on the top port of the wastegate. Using only a light spring to hold the valve closed with no boost pressure you are able to control this wastegate to much higher boost levels using positive pressure against the diaphragm with sources such as onboard CO2. A conversion kit for a V60 to a V60D is also available!

SPECIFICATIONS

- High temp NiCrFe based alloy valve and 347SS valve housing offer longer product life compared to competing designs.
- High temperature silicone Nomex reinforced actuator diaphragm.
- 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature and resists "relaxing" up to 900F (483C).
- Nitronic 60 Stainless Steel is used for the valve seat and valve bushing.
- All Stainless Steel hardware.
- Mating weld flanges are 304L
- Black anodized aluminum actuator.
- Flows 330CFM @ 1psi differential pressure

WHATS IN THE BOX

Included with every TiAL V60D:
- V60D Assembly
- V60 Valve Seat
- 2 TiAL Air Fittings
- Inlet Flanges and Clamps
- Outlet Flanges and Clamps

CONFIGURATION

Flange Materials 304L Stainless
Pipe Size Inlet Flange: 2.5" OD, Outlet Flange: 2.375" OD
Colors Black
Spring Pressures .2bar (3psi) & .4bar (6psi)
Thread Air Ports (2): M10 x 1.0