The B40 bracket is commonly used in formula and prototype applications where there are no in-line adjusters on the lap belts. This bracket incorporates a 3 bar slide into the bracket allowing you to adjust the length at the bolt in location. Note: you cannot adjust length once a driver is in the car. Dimensions are 4mm thick, 94x76mm with a 13mm (1/2") hole. There is a slight 10degree bend so that this bracket can be bolted directly to a fl at surface and leave room for webbing wrapped into it. This bracket can only be wrapped in. FIA and SFI 16.1 Approved. Use Part number B40 NC for SFI 16.5 approval.