Radium Engineering Remote Mount Dry Break Fuel Fillers - 1.5in / Female (Vented)

Description

NOTES:
- Radium Engineering dry break systems are compatible with other dry breaks of the same size.

Dry breaks allow quick fuel filling with no mess. The male dry break probe connects to a dump can fuel jug and the female dry break receiver installs on the vehicle's fuel filler. When the two couplings mesh together, both valve seals open and close with synchronized timing permitting no fuel leaks. Furthermore, it is no longer necessary to monitor the filling process when the dry break is used in conjunction with the 20-0535 Radium DSV Valve as vented air flow is automatically shut down when full.

Designed for remote mounting to an external surface such as a fender. Requires a 77mm (3.03") hole to be fabricated. Includes a 1.5in female dry break as well as a gasket, stainless steel hardware, an aluminum housing and aluminum nut ring. The vented fuel cap has roll-over protection in case the vehicle ever becomes inverted. The components, materials, and seals are compatible with all fuel types (unleaded and leaded gasoline, diesel, AV gas, methanol, ethanol, E15, E85, etc.).

The o-ring sealed 1.5" barbed outlet is interchangeable.

By simply removing 6 screws, a different outlet adapter (sold separately) can be installed.

SPECS & FEATURES
- Filler Hose Requirement: 1.5"
- Flange Outer Diameter: 4.75"
- Bolt Circle Diameter: 4.25" PCD
- Height: 4.08" (Dry Break to Barb)
- Mate: 20-0996 (or 20-0496) Dry Break, 1.5in, Male, PRV

INCLUDED
- Remote mount housing
- Dry break receptacle
- 1.5" barb adapter
- Threaded mounting ring
- Gasket
- Stainless steel hardware