Soul Performance Sport Headers - Porsche 991.2 Carrera 17-19

Description

Soul Performance Products performance headers increase power, response, and sound without compromising ground clearance.

- Fits all Porsche 991.2 Carrera vehicles
- Max power gains of approximately 12 whp and 20 ft-lbs of torque (as tested on Base model with ECU tune)
- Weighs 5.4 lbs / 2.4 kg less than factory exhaust components (9.9 lbs vs 15.3 lb)
- Designed and built in-house at our Willow Grove, PA facility
- All Soul Performance Products exhaust components are backed by our Lifetime Warranty for both street and track use

DEVELOPMENT
We sought out to maximize performance and boost response while minding clearance on daily driven cars. Our optimized 3 into 1 merge collector design improves response over the poor factory design, while our runners ultimately increase exhaust velocity into the collector and turbo. Looking into the factory headers you will notice a support in the middle runner which is detrimental to a smooth flow path out of that exhaust port, all in all the design is very basic with lots of room for improvement. The factory turbo inlet measures around 1.54" ID and we sized our header outlet to 1.63" for a smooth flow path into the turbo. The internal volume of the header combined with the resulting design improvements pairs well with the efficiency map of the turbo giving you noticeably quicker boost response and more power throughout the RPM range. Pushing the gas pedal down commands faster feedback from the car and each gear has more usable power before a downshift.

The factory header utilizes a double wall design while our design is single wall yielding in a more pleasing, sharper edge to the exhaust and increased turbo sound. Exhaust volume and tone quality are delightfully increased without yielding drone or undesirable qualities. Expect more burbles and sharper pops between shifts and on deceleration.

POWER
Shown above are the real, unedited, straight from the Mustang dyno results as conducted by Apex Autoworks with before and after runs on a Base model Carrera already equipped with SOUL Sport Catalytic Converters and SOUL Performance Exhaust with COBB Accessport Stage 2 Map. This dyno chart is made of the average performing charts of 3 before and 6 after runs. Max power gains of 12 whp and 20 ft-lbs come in quickly and hold until redline for a noticeable increase in driving performance. A custom Pro Tune would further take advantage of the increased flow and unlock greater gains.

CONSTRUCTION
Each set is assembled in house in the USA out of laser cut flanges and mandrel bent, thick wall .065" T304L stainless steel. Back purged TIG welding (with ARCAL Prime argon gas) ensures proper weld penetration and longevity. We fabricate these headers using thick gauge aluminum fixtures which act as a great heat sink during the welding process and prevent warping not only of our products, but the fixtures themselves to ensure perfect fitment.

BOLT ON AND GO
Every component is rigorously quality-checked, tested in a fixture to guarantee fitment, and then foam packed to ensure they arrive in perfect condition. New high grade hardware and OEM Porsche gaskets are included for installation.