Hondata FlashPro J-Swap Kit

Description

For a limited time, get a free Evasive Motorsports Evasive Motorsports 10mm Ratchet Keychain

Note: All electronics returned need to be sealed and in their original packaging and the tamper seal intact in order to receive a credit, exchange, or refund.

This J-swap kit includes the following items:
- FlashPro product code:FP-SWAP
- Honda ECU
- J-swap adapter harness
- Install instructions

This does not include engine, mounts, additional harnesses or additional parts to make this work. See install instructions for the complete parts list.
You will need: (Not included)
- Main Harness - 32200-SEP-A20
- Sub Harness - 32112-RDB-A00
- Accelerator Cable - 17910-SDB-A03
- Accelerator Pedal Position - 37971-RCA-A01
- Throttle Control Module - 37850-PZX-A01
- TPS DBW Harness - 37852-RDA-A00

The FlashPro allows full user tuning and datalogging for a drive by wire J series MT V6 Honda engine. It includes Windows based software called FlashProManager. The FlashPro connects from your laptop's USB port to your vehicles diagnostic port to provide live tuning with starting calibrations, extensive real time and stored datalogging capabilities. The starting swap calibrations allow you to start the engine. Tuning is mandatory. Hondata provides a used, tested TL ECU with a 1 year warranty. The Flashpro is permamently locked to this ECU by Hondata. Customer supplied ECUs are not supported.

Features
- Programmable ECU interface.
- 10 PSI boost with the stock MAP sensor. 43 psi boost with optional Hondata 4 bar sensor.
- Large injector calibration
- Connects via OBDII diagnostic port.
- USB 2.0 connection
- Works with Laptop or Desktop
- No ECU modification necessary.
- Live Tuning
- 20 hours on board datalogging memory.
- Security Password.
- FlashProManager Windows software.
- Check and clear diagnostic codes.
- Custom laptop gauges.
- Dual calibration storage - upload from one of two calibrations stored in the FlashPro

Supported engines (MT Only):
- 04-08 TL J32A3 and J35A8
- 05-08 RL J35A8
- 05-10 Odyssey LX and EX J35A6
- 05-08 Pilot J35A6 and J35A9
- 06-08 Ridgeline J35A9
- 03-06 MDX J35A5
- VCM engines not recommended.

The dyno chart was created with a 3.2 TL engine, 100 octane fuel, 50 psi WOT fuel pressure. Your power will greatly vary depending on your engine configuration, injectors, boost and tuning.