HKS Super Air Filter Replacement Element M2-Size (255x232) - Universal

Description

HKS Super Air Filter Replacement

Note: Rough/Coarse Surface should face air inlet side, Finer surface should face engine side

Instructions for Filter Cutting:
a. Lay old filter on top of the new filter material.
b. Trace edges of an old filter to draw a line for new filter with oil based ink pen.

Instructions for Filter Replacement :
1. Remove Super Air Filter from a vehicle.
2. Disassemble Super Air Filter frame and dispose an old filter. In case if the frame uses metal clips, undo metal clips first, then proceed to removing the filter. Please be careful not to damage the frame.
3. Prepare a new filter by cutting a replacement filter material (this product), if necessary. (Details below)
4. Fit a prepared filter into the frame. Part with letters [oooo-T] should be on the top of a coarse filter surface. Confirm that there are no gaps between the filter and frame sides.
5. Assemble the frame. In case if the frame uses metal clips, use metal clips to fixate the frame.
6. Install Super Air Filter Assembly into vehicle.

You may need to press on the assembly to fixate the frame when installing, as there might be a gap due to difference in thickness of the filter inside the frame in top and bottom part.