HKS Oil Filter 2 (Type 1) - D68mm x H65mm / M20-P1.5

Description

Click here for HKS Oil Filter Application Chart

As a product made in Japan, we have further strengthened the quality and renewed the packaging.

Utilizing the filter original designed for HKS Oil Filter and increasing its filter surface area by 15%, compared with a conventional product, greatly improved particle collection performance.

The JIS standard filtration accuracy is 25 micron, but this uses a high-performance filter with a filtration accuracy of 20 micron, which meets the filtration performance requirements of most engines and provides a stable oil environment.

The recommended replacement interval is every 10,000km or 6 months under normal use, but every 3,000 to 5,000km under high-stress conditions such as sports driving.





Compatibility: Please confirm that the filter unit size of 68xH65 / 74-H85 / 65-H50 and screw size. Installation to a vehicle which does not meet the conditions may result in engine damage due to leakage of oil.



Diameter of Oil Filter Screw: Make sure to select a proper oil filter screw size. Since both screw sizes are very close, M20 filter fits on UNF center bolt. If improper screw size is selected, it may cause the leakage of oil.



What is UNF screw?

It is a triangular thread form by inch in the ISO standard. The thread angle is 60 degrees. It is classified by the suffix "UN". The type of screw is described by a pitch as "Coarse" (UNC), "Fine" (UNF), "Extra fine" (UNEF). There is also one for aerospace equipment (UNJ). In Japan, use of this screw type is limited only for aircraft and automobiles, but it is widely used in the United States. JIS employs only coarse (UNC) and fine(UNF) pitches. This screw was initially designed for the military needs by the United States, the UK, and Canada.