NOTE: * Intake manifold, turbine and other engine auxiliary parts are not included. Oil Pan is not included.
COMPLETE ENGINE RB26DETT 2.8L STEP2 V-CAM
COMPLETE ENGINE that having V-CAM STEP Pro compatible with a large single turbine.
- Proven 2.8L STEP 2 kit is assembled by an experienced HKS engineer.
- Combustion chamber processed by CNC machining to reduce knocking.
- Employ a large capacity oil pump to ensure the stable lubrication of the engine on a whole RPM range.
- Selected the most optimal main bearing and connecting rod bearing through many strict tests.
- Grommet head gasket and strengthened stud bolt for improved sealing.
- High angle camshafts for improved high end performance.
- Reinforced valve spring and titanium retainer to suppress surging at high-rpm.
- Strengthen valve stem seal for improved sealing performance even at high-rpm and high temperatures.
- This product purposely employs V-CAM STEP Pro to the existing complete engine RB26DETT 2.8L STEP2 because of the consideration of the valve lift.
- Employing V-CAM STEP Pro brings out more engine performance. STEP Pro came from the name of the billet CAM.
- * HKS recommends using HKS Racing Pro 10W50 engine oil.
- 2.8L, Step 2 kit, forged piston, billet H-beam connecting rod, and forged crankshaft.
- High-strength and large capacity oil pump
- Intake: V-CAM System STEP PRO Exhaust: STEP2 272 degrees
- Slide Cam Pulley
- Titanium made valve spring retainer
- CNC machined combustion chamber that decreased combustion chamber volume smaller as much as possible and utilizes the squish area.
- Bore: 87.0mm
- Stroke: 77.7mm
- Compression Ratio (t=1.2): 8.6
- Maximum RPM: 8,800rpm
- Displacement: 2,771cc
- Camshaft: IN: HKS V-CAM STEP Pro 264 degrees / LIFT 10mm EX: HKS STEP 2 272 degrees / LIFT 10mm
- Timing Belt: HKS fine tune timing belt Sport Code No. 24999-AN002
- Spring Retainer: Titanium made HKS spring retainer
- Valve Spring: HKS reinforced valve spring Code No. 22001-AN001
- Stem Seal: HKS reinforced stem seal Code No. 22999-AN004
- Valve: Sheet sliding
- Port: Step removal around the seat area
- Combustion Chamber: CNC machined (with retained Squish area)
- Head Gasket: HKS Grommet type gasket (t=1.2) Code No. 23009-AN008
- Head Bolt: HKS reinforced bolts
- Block (24U)
- Processing Details: Cooling water hole / Hole side chamfering for head bolt / Boring
- Oil Pump: HKS reinforced oil pump Code No. 15003-AN001
- Piston: HKS forged piston kit Code No. 21003-AN003
- Connecting Rod: HKS H-beam connecting rod Code No. 2304-RN006
- Crankshaft: HKS forged crankshaft Code No. 23006-AN003
- Main Bearing: ACL bearing company made
- Connecting Rod Bearing: ACL bearing company made
- Covers: Baking finish