Haltech Platinum Pro Plug In - Honda S2000 AP1

Description

Platinum PRO Plug-in Honda S2000 AP1 Kit (2000-2004 & 2005 AP2 (Non DBW) (REQUIRES AN I/O BOX TO ACCEPT AN INPUT FROM A FLEX FUEL SENSOR) *Auxiliary I/O Harness Plug and Pins are now included in all direct plug-in kits

Features:
- Direct plug and play replacement of the OEM ECU, no re-wiring necessary.
- Uses the cars factory sensors
- Supports Honda's VTEC Control
- Supports Sequential Injection (peak and hold) and Direct fire ignition
- Windows 2000, XP, Vista, Windows 7 compatible software
- Real time programming, instant hesitation free adjustment while engine is running
- Fully user definable 32 x 32 mapping
- Tuning via Volumetric Efficiency (VE), Injection time or Lambda Correction (MAF)
- Diagnostic trouble code storing & Check engine light control(Access through laptop only )
- Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
- Wideband auto tuning using user definable target AFR table
- USB and CAN Communication Port

Factory Outputs:
- 4 x Fuel Injector outputs
- 4 x Ignition outputs
- VTEC, Coolant Gauge, AC Clutch Relay, Idle Control
- Thermo Fan, Check Engine Light, Fuel Pump

Factory Inputs:
- MAP sensor, Throttle Position Sensor, Knock Detection sensor,
- Coolant Temperature sensor, Vehicle Speed Sensor,
- Air Temperature sensor, Power Steering Switch, Narrowband Oxygen sensor

Expansion I/O*:
- 2 x Analogue Voltage inputs
- 2 x Analogue Temperature inputs
- 4 x Digital Outputs
*Optional auxiliary harness required to be purchased Haltech Part # HT040003

Functions:
- VTEC On - INJ / IGN Tables
- VTEC On - CAM Table
- Closed Loop O2 Control
- Decel Cut Over Boost Rev Limiter
- Closed & Open Loop Boost Control
- Gear Setup
- Transient Throttle Enhance
- Knock Control
- Long Term Fuel Trim

Correction Tables: Fuel Ignition Boost:
- Cranking
- Air Temp Target Correction
- Zero Throttle Gear Correction
- Cylinder Trim
- TPS Correction
- Generic Correction 1
- Generic Correction 2
- Gear Correction
- Post Start
- Air Temp Duty Correction
- Post Start

Miscellaneous:
- Data Logging: 448Kb of onboard data logging, Storage for approx 40 minutes at 10 logs per seconds, 6 channels of data
- Max 20 channels logging capability
- Tune can be password protected in software
- Rugged anodized aluminum casing

Power Requirements:
Source: 8.6 to 16.5 Volts DC
Consumption: 530mA @ 12Volts DC

Physical Dimensions:
ECU Dimensions Length: 154mm (176mm with MAP nipple)
Width: 158mm Height: 42mm Weight: 680g (1.5 lb)

Applications:
Honda S2000 (AP1)

The Kit includes:
Pro Plug-in ECU, USB Cable, Programming Software CD, Quick Start Guide, Instruction Manual (on CD)